- Broadcast-Quality Condenser Mic
- 3.5mm Output Plug
- 3/8″ Threaded Mount and Uses a Single 9V Battery (not included)
- Comes with Videomic Pro and deadcat windmuff
- Get a free copy of PluralEyes 3 if purchased before July 31st, 2013
The VideoMic Pro from Rode packs the audio quality and features of the popular VideoMic into an ultra compact and lightweight design that’s ideal for use with HDSLR cameras, camcorders, and audio recorders. The microphone has a broadcast-quality condenser capsule with a supercardioid pickup pattern to capture audio from the front, while minimizing pickup from the sides and rear.
On the rear of the mic, you’ll find a 3-way level control that offers -10dB, 0dB, and +20dB modes. There is also a 2-step high pass filter with 0 and 80Hz settings, letting you minimize the impact of low frequency hum, camera motor noise, and similar distractions. The mic has a standard camera shoe and a 3/8″ threaded mount for easy attachment to cameras and boom poles. The 3.5mm plug is compatible with a wide variety of different cameras and audio devices. The VideoMic Pro operates for up to 70 hours on a single 9V battery, allowing you to work in the field without constant replacements.
The broadcast-quality condenser capsule has a supercardioid pickup pattern to capture audio from the front, while minimizing pickup from the sides and rear
Integrated Shockmount and Windscreen
The integrated shockmount and foam windscreen minimize handling and wind noise to keep your recordings crystal clear
3-Way Level Control
The 3-way level control offers -10dB, 0dB, and +20dB modes, letting you set the perfect level regardless of what device the mic is connected to.
High Pass Filter
The power/HPF switch lets you turn the mic off, set it for a flat frequency response, or engage the 80Hz high pass filter. The filter minimizes the impact of low frequency hum, camera motor noise, and similar distractions.